Clarion DPX2250 ユーザーズマニュアル
4
APX/DPX Amplifiers
English
1. FEATURES
The Clarion APX2180, APX4360, DPX2250, DPX1800 and DPX11500 amplifiers fit a
variety of system configurations and provide these features:
variety of system configurations and provide these features:
• IVS - Input Voltage Selector with three sensitivity ranges on the gain control for the
ability to connect to almost any source
• PFS - Precise Frequency Selector, a detented crossover frequency adjustment
• Ground loop isolation for RCA inputs
• Full frequency response with low distortion and exceptional signal-to-noise
• Ground loop isolation for RCA inputs
• Full frequency response with low distortion and exceptional signal-to-noise
performance
• Advanced circuitry design provides bridgeable outputs for use in a variety of
applications
• Independent electronic crossovers to aid in audio system design
The DPX1800 and DPX11500 each have 24dB per octave slope and full adjust-
ment range from 30Hz to 250Hz.
ment range from 30Hz to 250Hz.
The APX2180, APX4360, and DPX2250 each have 12dB per octave slope and full
adjustment range from 50Hz to 550Hz.
adjustment range from 50Hz to 550Hz.
• Bass boost circuit on APX series amps to reinforce low frequency signals
• Remote turn-on with “soft start” muting to prevent turn-on “thump”
• Protection circuits for overheating and speaker shorts
• APX2180, APX4360 and DPX2250 are 2-Ohm load capable of driving a variety of
• Remote turn-on with “soft start” muting to prevent turn-on “thump”
• Protection circuits for overheating and speaker shorts
• APX2180, APX4360 and DPX2250 are 2-Ohm load capable of driving a variety of
speaker systems
• DPX1800 and DPX11500 are 1-Ohm load capable to drive a variety of subwoofers
• Gold-plated input/output connectors and on-board automotive-type fuses
• Aluminum heat sink for efficient heat dissipation
• Low profile, compact footprint to accommodate space limitations
• SLI - Speaker Level Inputs on amps for integration with factory sound systems
• SSF - Adjustable subsonic filter on the DPX1800 and DPX11500 can be turned
• Gold-plated input/output connectors and on-board automotive-type fuses
• Aluminum heat sink for efficient heat dissipation
• Low profile, compact footprint to accommodate space limitations
• SLI - Speaker Level Inputs on amps for integration with factory sound systems
• SSF - Adjustable subsonic filter on the DPX1800 and DPX11500 can be turned
down to 10Hz
• Automatic load-sensing circuit (full power into 1 or 2 Ohms) on the DPX1800 and
DPX11500
APX-DPXOwnersManual.pmd
2006-03-14, 21:46
4