APC High-Density Cooling Bottom Hose Kit ARACBH1 ユーザーズマニュアル
製品コード
ARACBH1
Bottom Hose Kit for the High-Density
Cooling Enclosure — ARACBH1
Cooling Enclosure — ARACBH1
Overview
The bottom hose kit is used to connect the High-Density Cooling Enclosure (HDCE) (ARAC15000U
& ARAC15000T) heat exchanger coil to the valve set assembly (ARACVB1) which controls the
flow of water from the cooling bus. The hose kit comprises cooled water flow and return flexible
hoses together with a hose seal (for maintaining the sealed enclosure integrity at the hose’s transit
point).
& ARAC15000T) heat exchanger coil to the valve set assembly (ARACVB1) which controls the
flow of water from the cooling bus. The hose kit comprises cooled water flow and return flexible
hoses together with a hose seal (for maintaining the sealed enclosure integrity at the hose’s transit
point).
Inventory
Cam-locking outer duct (1)
Cam-lock connector (1)
(attached to cam-locking
outer duct)
Valve box leak detection
sensor (provided with
HDCE)
Inner hoses with self-sealing coupling (2)
Male adapter (2) (attached to
inner hoses)
Hose/cable widening
strip (1)
Top access hole seal (4)
3-hole power distribution
cable seal (1)
Power distribution cable
hole plug (2)
5-hole power distribution
cable seal (1)
5-hole cable access seal (2)
Cable access seal
hole plug (10)
3-hole inner hose seal (1)
3-hole inner hose seal
plug (1)