Omnitron iConverter GM3 8970P-0 ユーザーズマニュアル

 

■ Network Interface Device for 1000Mbps and 100Mbps 

Carrier Ethernet Fiber Access 

 

■ 802.1ad VLAN stacking (Q-in-Q) for E-Line and E-LAN 

service multiplexing 

 

■ Smallest full-function NIDs available with the lowest 

power consumption

 

■ Advanced traffic management with service mapping and 

traffic policing and shaping

 

■ MEF 9, 14 and 21 Certified Compliant

 

■ MEF 30 and 31 Compliant

 

■ IEEE 802.1ag End-to-End Connectivity Fault 

Management (CFM)

 

■ ITU-T Y.1731 End-to-End Performance Monitoring

 

■ Zero-Touch Provisioning

 

■ Granular Rate Limiting using Committed Information 

Rate (CIR) and Committed Burst Size (CBS) per UNI, 

EVC and CoS 

 

■ Remote management through TELNET, SNMPv1/v2c/v3 

and IP-less 802.3ah OAM extensions

 

■ SNMP management via Omnitron’s NetOutlook

®

 Network 

Management software

 

■ Fully integrated with Cyan CyPortal

®

 

■ Geo-diverse uplink redundancy (1:1) option

 

■ Supports 1000BASE-X and 100BASE-FX Small Form 

Pluggable (SFP) transceivers for standard or CWDM 

applications 

 

■ Commercial (0 to 50ºC), wide (-40º to 60ºC) and 

extended (-40º to 75º C) temperature ranges 

The 

 GM3 is a flexible and cost-effective Network 

Interface Device (NID) with Service and Link Operations, 

Administration and Maintenance (OAM) capabilities. The 

GM3 provides Carrier Ethernet service demarcation with rapid 

service activation, SLA assurance and fault management.

The GM3 supports MEF-certified User-to-Network Interface 

(UNI) functions including Class of Service (CoS) management, 

granular rate-limiting, and 802.1ad Provider Bridge VLAN 

stacking (Q-in-Q) for service multiplexing of multiple E-Line, 

E-LAN  and  E-Tree  services.    The  GM3  provides  per-flow 

service mapping, traffic policing and shaping.  CIR/EIR “two 

rates, three colors” ingress port policing provides granular 

bandwidth optimization.  The GM3 also provides advanced 

classification and filtering of subscriber traffic as an EVC or 

CoS flow based on layer 1, 2, 3 or 4 identifiers.

The GM3 supports carrier-class Ethernet Service OAM 

standards.  IEEE 802.1ag Connectivity Fault Management 

(CFM) proactively monitors service availability and provides 

tools for rapid fault isolation.  ITU-T Y.1731 Performance 

Monitoring provides the ability to monitor key SLA parameters 

including frame delay, frame delay variation and frame loss.  

These OAM features provide proactive fault detection and rapid 

isolation of potential service problems, enabling SLA assurance 

while reducing Operational costs (OPEX). 

 GM3 NIDs provide industry-leading interoperability 

with the most comprehensive 802.1ag and Y.1731 standards 

implementations. 

Zero-Touch Provisioning (ZTP) allows providers to achieve 

efficiencies in service activation that accelerate turn up and 

reduce the need for onsite technicians.   ZTP allows service 

provisioning to be centralized, standardized and remotely 

managed.  

The GM3 fiber ports support Gigabit (1000BASE-X) or Fast 

Ethernet (100BASE-FX) SFP transceivers, and the copper 

interface operates at 1000, 100 or 10Mbps.  The GM3 is 

available in 2-port or 3-port options.  The 3-port configuration 

supports geo-diverse redundant access links or multi-tenant 

demarcation with two subscriber ports.

SFPs not included