Draper Luma 207121 ユーザーズマニュアル

is designed to raise and lower a wide range of products commonly used on stages, in 

gymnasiums and churches and other public venues . It consists of a motor winch and one or more PosiSpools™, connected by a drive shaft and 
mounted to the ceiling structure . TorkStar utilizes aircraft cable lift lines with a lifting capacity of 500 pounds each . 

• One TS1000 Motor Winch or one TS1400 Motor.
• One or more PS500 PosiSpools (two or more when TS1400 Motor is used).

TS1000 Motor Winch

503106

1,000 lb lifting capacity . Includes 50 ft . of cable and one KS2DBL Key 

Operating Switch .

85

$2523

TS1400 Motor

503107

1,400 lb lifting capacity . Includes one KS2DBL Key Operating Switch .

163

5711

PS500 PosiSpool

503108

Up to 500lb capacity . Includes 50 ft . of cable and two PS500SC  

Drive Shaft Couplings .

47

1835

 
TS1000 Motor Winches and PosiSpools are shipped with 50 ft . of 3/16” 
7x19 stainless aircraft cable with an S-409 swaged button on one end .  
Includes 3/16” thimble and two G-249 3/16” Fist Grip Clips . 

Note: You can use up to 5 PosiSpools, spaced on 10-15 ft . centers (typical 
spacing is 10-12 ft . centers), so total width of system can be up to 50-75 ft .

1 . Total lift weight must not exceed lifting capacity of motor .
2 . Maximum weight per lift line must not exceed 500 lbs .
3 . TS1400 Motor requires minimum of 2 PosiSpools (3 or more required 

if load is over 1,000 lbs) .

 

MK500 Beam Mounting Kit

C504 .063 OPTIONAL—One per Motor or PosiSpool . For attaching to steel beam that is 

perpendicular to the Line Set .

11

$200

TS90 Parallel Beam Adapter Plate

C010 .295

OPTIONAL—One per MK500 Mounting Kit . For attaching to steel beam that is 

parallel to and directly above the Line Set .

17

154

500BH Adjustable  

Batten Clamp

C016 .069

Strongly recommended if you are going to use a batten . One required per lift 

line . not for use with Projection Screen Batten.

4

167

500CF Ceiling Flange

C504 .064 OPTIONAL—One per lift line .

2

67

Drive Shaft

503132

REQUIRED—23/8” O .D . / 2” I .D . Schedule 40 pipe . Available from Draper in 21’ 

lengths, or you can source locally . Purchase longer lengths than required and 

cut to exact size on job site .

77

164

Batten

503133

OPTIONAL—17/8” O .D . / 11⁄2” I .D . Schedule 40 pipe . Available from Draper in 21’ 

lengths, or you can source locally . Purchase longer lengths than required and 

cut to exact size on job site .

57

164

PS500SC Drive Shaft Coupling 

(Replacement)

C131 .030

Attaches drive shaft to Motor and PosiSpools .  

4

185

KS2DBL Operating Switch (Replacement)

C112 .110

REQUIRED—Single gang double key switch .

2

250

Electrical Cable Management System

503113

OPTIONAL— Assists in providing power to a motorized projection screen . 

35’ long adjustable industrial-grade precision cable reel . 300 Volt, 8 amp, 4 

conductor with stripped ends . Includes electrical connector and strain relief .  

UL and CSA Listed .

35

1085

Electrical Cable Management System Beam 

Mounting Kit

503110

OPTIONAL—For mounting cable management system to beam . Consists of one 

MK500 Beam Mounting Kit, one cable reel mounting plate, and hardware .

15

250

Motor Test Cord

503109

6’ long with inline 3-position up/down/stop switch .

2

84

• Projection Screens
• Lighting (House 

Lights, Front of 
House Lighting, 
Stage Lighting)

• Speakers

• Backdrops
• Background Sets
• Scenery
• Draperies
• Curtains
• Scrims

• Signs
• Banners
• Flags
• Chandeliers