Dataram 1 x 16GB 2Rx4 DIMM DRIX1600R/16GB プリント
製品コード
DRIX1600R/16GB
DRIX1600R
DDR3-1600, PC3-12800, Registered, ECC, 1.5V, 240-pin DIMMs
DRIX1600R
17-May-12
Copyright
2012 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRIX1600RS/4GB (1 x 4GB 1Rx4 DIMM)
DRIX1600R/4GB (1 x 4GB 2Rx8 DIMM)
DRIX1600R/8GB (1 x 8GB 1Rx4 DIMM)
DRIX1600R/16GB (1 x 16GB 2Rx4 DIMM)
DRIX1600R/4GB (1 x 4GB 2Rx8 DIMM)
DRIX1600R/8GB (1 x 8GB 1Rx4 DIMM)
DRIX1600R/16GB (1 x 16GB 2Rx4 DIMM)
Features
Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181
133.35 mm wide by 30 mm high (1.181
” x 5.25”)
Data Transfer Rate: 12.8 Gigabytes/sec
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
Operating Voltage: 1.5 V ±0.075
Fully RoHS Compliant
Thermal Sensor
Each DRIX1600R upgrade consists of a single DDR3-
1600 Registered ECC DIMM that
1600 Registered ECC DIMM that
conforms to JEDEC’s
DDR3, PC3-12800 standard. One 2K-bit EEPROM is
used for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
used for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
Dataram Product
IBM Product
Supported in these IBM systems:
DRIX1600RS/4GB
DRIX1600R/4GB
DRIX1600R/8GB
DRIX1600R/16GB
DRIX1600R/4GB
DRIX1600R/8GB
DRIX1600R/16GB
49Y1559
90Y3178
90Y3109
Not Offered by IBM
90Y3178
90Y3109
Not Offered by IBM
IBM System x iDataPlex dx360 M4, X3500 M4, X3550
M4, X3650 M4
M4, X3650 M4
Note: Not all memory upgrades are supported in all models
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]