Dataram 1 x 8GB 2Rx4 DIMM DRSX4170M3/8GB プリント
製品コード
DRSX4170M3/8GB
DRSX4170M3
DDR3-1600, PC3L-12800, Registered, ECC, 1.35V, 240-pin DIMMs
DRSX4170M3
9-May-12
Copyright
2012 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRSX4170M3/8GB (1 x 8GB 2Rx4 DIMM)
DRSX4170M3/16GB (1 x 16GB 2Rx4 DIMM)
DRSX4170M3/32GB (1 x 32GB 4Rx4 DIMM)
DRSX4170M3/16GB (1 x 16GB 2Rx4 DIMM)
DRSX4170M3/32GB (1 x 32GB 4Rx4 DIMM)
Features
Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181
133.35 mm wide by 30 mm high (1.181
” x 5.25”)
Data Transfer Rate: 12.8 Gigabytes/sec
Operating Voltage: 1.35 V ±0.075 (1.5 V tolerant)
Fully RoHS Compliant
Thermal Sensor
Operating Voltage: 1.35 V ±0.075 (1.5 V tolerant)
Fully RoHS Compliant
Thermal Sensor
Each DRSX4170M3 upgrade consists of a single DDR3-
1600 Registered ECC DIMM that conforms to
1600 Registered ECC DIMM that conforms to
JEDEC’s
DDR3, PC3L-12800 standard. One 2K-bit EEPROM is
used for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
used for Serial Presence Detect and a combination
register/PLL with Address and Command Parity is also
used. A thermal sensor accurately monitors the DIMM
module and can prevent exceeding the maximum
operating temperature of 95C.
Note: The 32GB DIMM is DDR3-1066 PC3L-8500
Dataram Product
Oracle / Sun Product
Supported in these Oracle / Sun systems:
DRSX4170M3/8GB
DRSX4170M3/16GB
DRSX4170M3/32GB
DRSX4170M3/16GB
DRSX4170M3/32GB
7100790
7100794
7100792
7100794
7100792
Sun Fire X4170 M3, X4270 M3, Sun Blade X6270 M3
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]