HP ML350e 648376-001 ユーザーズマニュアル
製品コード
648376-001
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
ML350e Gen8 Tower Models
HP ProLiant ML350e Gen8 Non-hot Plug 4 LFF Configure-to-order Server
664043-B21
Includes:
HP Ethernet 1Gb 2--port 361i Adapter
HP Dynamic Smart Array B120i SATA Controller (RAID 0/1/10)
Four (4) Non-Hot-Plug (LFF) SATA Drive Bays
Ten (10) USB ports
Six (6) PCIe slots
Two (2) Non-hot plug, non-redundant fans
HP iLO Management Engine (standard)
Tower (5U) form factor
HP Dynamic Smart Array B120i SATA Controller (RAID 0/1/10)
Four (4) Non-Hot-Plug (LFF) SATA Drive Bays
Ten (10) USB ports
Six (6) PCIe slots
Two (2) Non-hot plug, non-redundant fans
HP iLO Management Engine (standard)
Tower (5U) form factor
HP ProLiant ML350e Gen8 Hot Plug 6 LFF Configure-to-order Server
664044-B21
Includes:
HP Ethernet 1Gb 2--port 361i Adapter
HP Dynamic Smart Array B120i SATA Controller (RAID 0/1/10)
Six (6) Hot-Plug (LFF) SATA Drive Bays
HP Dynamic Smart Array B120i SATA Controller (RAID 0/1/10)
Six (6) Hot-Plug (LFF) SATA Drive Bays
NOTE: A SAS controller is required to support 6 LFF drives. Otherwise, only 4 SATA
drives are supported with the embedded controller. HP Hot-Plug 4LFF Shield Metal FIO
Kit (704853-B21) must be selected to use 4 SATA drives with embedded controller.
drives are supported with the embedded controller. HP Hot-Plug 4LFF Shield Metal FIO
Kit (704853-B21) must be selected to use 4 SATA drives with embedded controller.
Ten (10) USB ports
Six (6) PCIe slots
Two (2) Non-hot plug, non-redundant fans
HP iLO Management Engine (standard)
Tower (5U) form factor
Six (6) PCIe slots
Two (2) Non-hot plug, non-redundant fans
HP iLO Management Engine (standard)
Tower (5U) form factor
HP ProLiant ML350e Gen8 Hot Plug 8 SFF Configure-to-order Server
664045-B21
Includes:
HP Ethernet 1Gb 2--port 361i Adapter
HP Dynamic Smart Array B120i SATA Controller (RAID 0/1/10)
Eight (8) Hot-Plug (SFF) SATA Drive Bays
HP Dynamic Smart Array B120i SATA Controller (RAID 0/1/10)
Eight (8) Hot-Plug (SFF) SATA Drive Bays
NOTE: A SAS controller is required to support 8 SFF drives.
Ten (10) USB ports
Six (6) PCIe slots
Two (2) Non-hot plug, non-redundant fans
HP iLO Management Engine (standard)
Tower (5U) form factor
Six (6) PCIe slots
Two (2) Non-hot plug, non-redundant fans
HP iLO Management Engine (standard)
Tower (5U) form factor
QuickSpecs
HP ProLiant ML350e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14340 North America — Version 9 — October 11, 2012
Page 21