HP ML350e 648376-001 ユーザーズマニュアル

製品コード
648376-001
ページ / 52
System Unit
Dimensions
(H x W x D)
(with feet/bezel)
18.19 x 8.58 x 29.13 in (46.2 x 21.8 x 74.0 cm)
Weight
(approximate)
Maximum
(all hard drives, power
supplies, and processors
installed)
96.67 lb (43.85 kg)
Minimum
(one hard drive, power
supply, and processor
installed)
57.21lb (25.95 kg)
Input Requirements
(per power supply)
Rated Line Voltage
100 to 240 VAC
Rated Input Current
7.1 Amps (at 120VAC) to 3.5 Amps (at 240 VAC)
Rated Input Frequency
50 to 60 Hz
Rated Input Power
852 W
BTU Rating
Maximum
460W - 1773 BTU / hr (at 120 VAC), 1715 (at 240
VAC)
750W - 2892 BTU / hr (at 120 VAC), 2797 (at 240
VAC)
1200W - 3530 BTU / hr (at 120 VAC), 4600 (at 240
VAC)
Power Supply Output
(per power supply)
 
Rated Steady-State Power 460(750) W (at 100 VAC)
460(750) W (at 200 VAC)
Maximum Peak Power
460(750) W (at 100 VAC)
460(750) W (at 200 VAC)
System Inlet
Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3048 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
Altitude
Operating
3048 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
QuickSpecs
HP ProLiant ML350e Generation 8 (Gen8)
Technical Specifications
DA - 14340   North America — Version 9 — October 11, 2012
Page  49