IBM x3750 M4 8722B1G 情報ガイド

製品コード
8722B1G
ページ / 44
IBM System x3750 M4
7
Standard specifications
The following table lists the standard specifications. 
Table 1. Standard specifications (part 1)
Components
Specification
Form factor
2U rack.
Processor
Up to four Intel Xeon processor E5-4600 product family processors, each with eight cores (up to 
2.7 GHz), six cores (up to 2.9 GHz), or four cores (up to 2.0 GHz). Two processor sockets on 
the system board and two processors on the processor and memory expansion tray (standard 
on most models). Two QPI links up to 8.0 GTps each. Up to 1600 MHz memory speed. Up to 20 
MB L3 cache per processor. 
Chipset
Intel C600 series.
Memory
Up to 48 DIMM sockets (12 DIMMs per processor). RDIMMs and LRDIMMs (Load Reduced 
DIMMs) are supported, but memory types cannot be intermixed. The memory speed is up to 
1600 MHz. There are 24 DIMM sockets on the system board. There are an additional 24 DIMM 
sockets on the processor and memory expansion tray (standard on most models).
Memory 
maximums
With RDIMMs: Up to 768 GB with 48x 16 GB RDIMMs and four processors,
With LRDIMMs: Up to 1.5 TB with 48x 32 GB LRDIMMs and four processors.
Memory 
protection
ECC, Chipkill (for x4-based memory DIMMs), memory mirroring, and memory sparing.
Disk drive bays
Up to 16 2.5-inch hot-swap SAS/SATA bays or up to 32 1.8-inch hot-swap solid-state drive 
(SSD) eXFlash bays. Drive bays can be in any combination of four 2.5-inch drives or eight 
1.8-inch eXFlash SSD drives. 
Maximum 
internal storage 
Up to 14.4 TB with 900 GB 2.5-inch SAS HDDs, up to 16 TB with 1 TB 2.5-inch NL SAS/SATA 
HDDs, or up to 6.4 TB of SSDs. An intermix of SAS/SATA is supported.
RAID support
RAID 0, 1, 10 with integrated ServeRAID M5110e with LSI SAS2208 6 Gbps RAID on Chip 
(ROC) controller. Optional upgrades to RAID 5 and 50 are available (zero-cache is 512 MB and 
battery-backed cache is 512 MB or 1 GB flash-backed cache). There is an optional upgrade to 
RAID 6 and 60 for a 512 MB or 1 GB cache.
Optical drive 
bays
There is one bay for an optional Multiburner drive.
Tape drive bays
None internal. Use a supported external tape drive.
Network 
interfaces
Emulex BE3 controller with two standard integrated Gigabit Ethernet 1000BASE-T ports (RJ-45) 
and two optional 10 Gb ports through an adapter in a dedicated slot. The 10 GbE options are 
10Base-T dual port (copper) or SFP+ dual port  (fiber).
PCI Expansion 
slots 
Up to eight slots, five on the system board, three on an optional riser card. The slots are as 
follows:
Slot 1: PCIe 3.0 x8; full-height, half-length (optional with riser card, requires processor 2)
Slot 2: PCIe 3.0 x8; full-height, half-length (optional with riser card, requires processor 2)
Slot 3: PCIe 3.0 x8; full-height, half-length (optional with riser card, requires processor 2)
Slot 4: PCIe 3.0 x8; low profile (requires processor 2)
Slot 5: PCIe 3.0 x8; low profile (requires processor 2)
Slot 6: PCIe 3.0 x8; low profile
Slot 7: PCIe 3.0 x8; low profile
Slot 8: PCIe 3.0 x8; low profile
Slots 1, 2, and 3 are physically x16 slots.