Altronix HUBWAYLD8CD プリント

Altronix HubWayLD8CD Active UTP
Transceiver Hub w/Integral Camera Power
transmits UTP video, RS422/RS485 data
and power over a single CAT-5 or higher 
structured cable. Unit provides 8 camera
channels in a space saving 1U EIA 19” rack mount chassis which
may be rack, wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compati-
ble with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi 
Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC PTC protected 
outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power
can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured
cable back to the HubWayLD8CD. In addition, the HubSat4D provides power to these cameras locally to eliminate
the possibility of voltage drop associated with long cable runs.

• 115VAC 50/60Hz, 1.5 amp.
• Primary fuse (internal) is rated at 5 amp/250V.

• Eight (8) channels of video over twisted pair

up to a distance of 3000 ft. per channel.

• Eight (8) 75 ohm video outputs.

• RS422/RS485 data inputs.

• Individually selectable 24VAC or 28VAC power 

outputs with OFF position.

• Unit provides up to 1 amp max. per channel not to 

exceed a total of 5 amp (150VA) maximum current.

• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp 

per channel.

• Surge suppression.

• AC input power indicator.
• Video signal and power LED indicators.

• Picture and Gain control.
• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.

• Optional HubSat4D allows transmission of up to 

four (4) video signals over a single CAT-5 or higher
structured cable.

• Video Balun/Combiners:

- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC 

cameras without isolation.

- HubWayLD8CD: 13.5 lbs.
- HubWayLD82CD: 14.7 lbs.
- HubWayLD83CD: 14.2 lbs.

Eight (8) Channel Active UTP Transceiver
Hub with Integral Camera Power
HubWayLD82CD

Eight (8) Channel Active UTP Transceiver with 
eight (8) HubWayAv Video Balun/Combiners

Eight (8) Channel Active UTP Transceiver with 
eight (8) HubWayDv Video Balun/Combiners

Rev. DSHubWayLD8CD - E20I

UL Listed for Commercial CCTV Equipment
(UL 2044).

CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.