Altronix MAXIMAL35E プリント
Agency Approvals
Power options
Power Supply 1
Power Supply 2
A
12VDC @ 6 amp
12VDC @ 10 amp
B
24VDC @ 6 amp
12VDC @ 10 amp
This unit provides system designers and installers with “maximum” power
choices and the highest levels of versatility. It provides 12VDC, 24VDC,
or 12VDC and 24VDC simultaneously via two (2) single output power
supply/chargers. It includes AC fail, low battery and battery presence
monitoring. Optional Altronix
choices and the highest levels of versatility. It provides 12VDC, 24VDC,
or 12VDC and 24VDC simultaneously via two (2) single output power
supply/chargers. It includes AC fail, low battery and battery presence
monitoring. Optional Altronix
®
field installable sub-assemblies provide
multiple outputs and a wide range of features for specific Access Control
and Fire Alarm applications.
and Fire Alarm applications.
• 12VDC, 12VDC and 24VDC output.
• 115VAC 60Hz, 6.0 amp input.
• Input fuse rated @ 3.5 amp.
• Filtered and electronically regulated outputs.
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current 0.7 amp.
• Automatic switch over to stand-by battery
when AC fails.
• Zero voltage drop when unit switches over
to battery backup (AC failure condition).
• 115VAC 60Hz, 6.0 amp input.
• Input fuse rated @ 3.5 amp.
• Filtered and electronically regulated outputs.
• Built-in charger for sealed lead acid or
gel type batteries.
• Maximum charge current 0.7 amp.
• Automatic switch over to stand-by battery
when AC fails.
• Zero voltage drop when unit switches over
to battery backup (AC failure condition).
• Short circuit and thermal overload protection
with auto reset.
• AC input and DC output LED indicators.
• AC fail supervision (form “C” contact).
• Battery fail and battery presence supervision
(form “C” contact).
• Enclosure accommodates up to
four (4) 12AH batteries.
• Product weight: 28.6 lbs.
• Shipping weight: 30.6 lbs.
with auto reset.
• AC input and DC output LED indicators.
• AC fail supervision (form “C” contact).
• Battery fail and battery presence supervision
(form “C” contact).
• Enclosure accommodates up to
four (4) 12AH batteries.
• Product weight: 28.6 lbs.
• Shipping weight: 30.6 lbs.
Maximal35E
Expandable Power System
Rev. DSMaximal35E - A18K
Overview
Specifications
Maximal35E
UL Listed for Access Control System Units
(UL 294).
(UL 294).
CUL Listed - CSA Standard C22.2
No.205-M1983, Signal Equipment.
No.205-M1983, Signal Equipment.
CSFM -
California State Fire Marshall Approved
California State Fire Marshall Approved