Altronix HUBWAY82D プリント

ページ / 2
Altronix HubWay8D Passive UTP Transceiver
Hub w/Integral Camera Power transmits UTP
video, RS422/RS485 data and power over a
single CAT-5 or higher structured cable. Unit
provides 8 camera channels in a space saving
1U EIA 19” rack mount chassis which may be rack, wall or
shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC
fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. 
In addition, the unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression.
An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory 
module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the
HubWay8D. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of 
voltage drop associated with long cable runs.
Input:
• 115VAC 50/60Hz, 1.5 amp
or 230VAC 50/60Hz, 1 amp.
Video:
• Eight (8) channels of video over twisted pair
up to a distance of 750 ft. per channel.
• Eight (8) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power 
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to 
exceed a total of 5 amp (150VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp 
per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
• Eight (8) individual power LED indicators.
Features:
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Accessories:
• Optional HubSat4D allows transmission of up to 
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC 
cameras without isolation.
Shipping Weight (approximate):
- HubWay8D: 12.3 lbs.
- HubWay82D: 13.0 lbs.
- HubWay83D: 13.5 lbs.
HubWay8D
Eight (8) Channel Passive UTP Transceiver
Hub with Integral Camera Power
HubWay82D
Eight (8) Channel Passive UTP Transceiver with 
eight (8) HubWayAv Video Balun/Combiners
HubWay83D
Eight (8) Channel Passive UTP Transceiver with 
eight (8) HubWayDv Video Balun/Combiners
HubWay
®
8D Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWay8D - E18I
Overview
Specifications
Models
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals