Altronix HUBWAYLD16D プリント

Altronix HubWayLD16D Active UTP Transceiver
Hub w/Integral Camera Power transmits UTP
video, RS422/RS485 data and power over a
single CAT-5 or higher structured cable. Unit
provides 16 camera channels in a space saving
1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted.
Video transmission range is up to 3000 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ
cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the
unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional
HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit
video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLD16D. In addition,
the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with 
long cable runs.

• 115VAC 60Hz, 3 amp

or 230VAC 50/60Hz, 1.5 amp.

• Primary fuse (internal) is rated at 5 amp/250V.

• Sixteen (16) channels of video over twisted pair

up to a distance of 3000 ft. per channel.

• Sixteen (16) 75 ohm video outputs.

• RS422/RS485 data inputs.

• Individually selectable 24VAC or 28VAC power 

outputs with OFF position.

• Unit provides up to 1 amp max. per channel not to 

exceed a total of 10 amp (300VA) maximum current.

• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp 

per channel.

• Surge suppression.

• AC input power indicator.
• Video signal and power LED indicators.

• Picture and Gain control.
• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.

• Optional HubSat4D allows transmission of up to 

four (4) video signals over a single CAT-5 or higher
structured cable.

• Video Balun/Combiners:

- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC 

cameras without isolation.

- HubWayLD16D: 22.15 lbs.
- HubWayLD162D: 23.55 lbs.
- HubWayLD163D: 24.55 lbs.

Active UTP Transceiver Hub with Integral Camera
Power. Video Balun/Combiners not included.
HubWayLD162D

Active UTP Transceiver Hub with Integral Camera
Power with sixteen (16) HubWayAv Video
Balun/Combiners.

Active UTP Transceiver Hub with Integral Camera
Power with sixteen (16) HubWayDv Video
Balun/Combiners.

Rev. DSHubWayLD16D - E20I

UL Listed for Commercial CCTV Equipment (UL 2044).