HP DL580 G7 X7550 4P 64GB Rfrbd 584085R-421 ユーザーズマニュアル
製品コード
584085R-421
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server
NOTE: FIO indicates that this option is only available as a factory installable option.
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Configuration
HP Models
HP ProLiant DL580 G7 (E7) Configure-to-order Server
643086-B21
Factory Integrated Models ship with:
HP NC375i Integrated Quad Port Gigabit Server Adapter
Four HP DL580G7/DL980 G7 (E7) Memory Cartridges
Five standard PCI-express slots
HP Smart Array P410i/ Zero Memory Controller
Four redundant hot-plug fans
SFF SAS/SATA/SSD drive cage
HP Integrated Lights-Out 3 (iLO 3) management processor: integrated on system board
Rack (4U), 7-inch
Four HP DL580G7/DL980 G7 (E7) Memory Cartridges
Five standard PCI-express slots
HP Smart Array P410i/ Zero Memory Controller
Four redundant hot-plug fans
SFF SAS/SATA/SSD drive cage
HP Integrated Lights-Out 3 (iLO 3) management processor: integrated on system board
Rack (4U), 7-inch
NOTE: Power supplies need to be selected separately from Step 2 below.
NOTE: Customers purchasing the Intel® Xeon® Processor E7 series will need to
purchase the HP DL580R07 (E7) CTO Server (PN 643086-B21)
NOTE: Customers purchasing the Intel® Xeon® Processor E7 series will need to
purchase the HP DL580R07 (E7) CTO Server (PN 643086-B21)
HP ProLiant DL580 G7 (E7) BC NIC Configure-to-order Server
643086-B22
Factory Integrated Models ship with:
HP Ethernet 1Gb 4-port 331i-SPI Adapter
Four HP DL580G7/DL980 G7 (E7) Memory Cartridges
Five standard PCI-express slots
HP Smart Array P410i/ Zero Memory Controller
Four redundant hot-plug fans
SFF SAS/SATA/SSD drive cage
HP Integrated Lights-Out 3 (iLO 3) management processor: integrated on system board
Rack (4U), 7-inch
HP Ethernet 1Gb 4-port 331i-SPI Adapter
Four HP DL580G7/DL980 G7 (E7) Memory Cartridges
Five standard PCI-express slots
HP Smart Array P410i/ Zero Memory Controller
Four redundant hot-plug fans
SFF SAS/SATA/SSD drive cage
HP Integrated Lights-Out 3 (iLO 3) management processor: integrated on system board
Rack (4U), 7-inch
NOTE: Power supplies need to be selected separately from Step 2 below.
NOTE: Customers purchasing the Intel® Xeon® Processor E7 series will need to purchase
the HP DL580R07 (E7) CTO Server (PN 643086-B22)
NOTE: Customers purchasing the Intel® Xeon® Processor E7 series will need to purchase
the HP DL580R07 (E7) CTO Server (PN 643086-B22)
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
noted)
HP Processors
NOTE: If more than two processors are desired, select one xxxxxx-L21 and additional
processors would be xxxxxx-B21. 3P configurations are not supported.
processors would be xxxxxx-B21. 3P configurations are not supported.
Ten-Core Processors
HP DL580 G7 Intel® Xeon® E7-4870 (2.40GHz/10-core/30MB/130W) FIO 2-processor Kit
NOTE: QPI speed is 6.40 GT/s
643067-L21
HP DL580 G7 Intel® Xeon® E7-4860 (2.26GHz/10-core/24MB/130W) FIO 2-processor Kit
NOTE: QPI speed is 6.40 GT/s
643069-L21
HP DL580 G7 Intel® Xeon® E7-4850 (2.00GHz/10-core/24MB/130W) FIO 2-processor Kit
NOTE: QPI speed is 6.40 GT/s
643071-L21
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Configuration Information - Factory Integrated Models
DA - 13669 Worldwide — Version 35 — September 24, 2012
Page 18