Altronix HUBWAYLD8CDS プリント
Altronix new HubWayLD8CDS Active UTP
Transceiver Hub w/Integral Camera
Power transmits UTP video,
RS422/RS485 data and power over
a single CAT-5 or higher structured
cable. Unit provides 8 camera chan-
nels in a space saving 1U EIA 19” rack mount chassis which may be
wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with
AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video
Balun/Combiners. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used
as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back
to the HubWayLD8CDS. In addition, the HubSat4D provides power to these cameras locally to eliminate the
possibility of voltage drop associated with long cable runs.
Transceiver Hub w/Integral Camera
Power transmits UTP video,
RS422/RS485 data and power over
a single CAT-5 or higher structured
cable. Unit provides 8 camera chan-
nels in a space saving 1U EIA 19” rack mount chassis which may be
wall or shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with
AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video
Balun/Combiners. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used
as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back
to the HubWayLD8CDS. In addition, the HubSat4D provides power to these cameras locally to eliminate the
possibility of voltage drop associated with long cable runs.
Input:
• 115VAC 60Hz, 1.5 amp.
• Primary fuse is rated at 5 amp/250V.
• Primary fuse is rated at 5 amp/250V.
Video:
• Eight (8) channels of video over twisted pair
up to 3000 ft.
• Eight (8) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individual field selectable 24VAC or 28VAC outputs.
• Unit provides up to 1 amp max. per channel not to
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC’s are rated @ 1 amp per channel.
• Surge suppression.
• PTC’s are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
• Eight (8) individual video LED indicators.
• Eight (8) individual video LED indicators.
Features:
• Picture and Gain control.
• Illuminated master power disconnect circuit breaker
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Optional Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
structured cable.
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Shipping Weight (approximate):
- HubWayLD8CDS: 13 lbs.
- HubWayLD82CDS: 14.2 lbs.
- HubWayLD83CDS: 13.7 lbs
- HubWayLD82CDS: 14.2 lbs.
- HubWayLD83CDS: 13.7 lbs
HubWay
®
LD8CDS Active UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWayLD8CDS - E20I
Overview
Specifications
HubWayLD8CDS
Active UTP Transceiver Hub with Integral Camera
Power. Video Balun/Combiners not included.
HubWayLD82CDS
Power. Video Balun/Combiners not included.
HubWayLD82CDS
Active UTP Transceiver Hub with Integral Camera
Power with eight (8) HubWayAv Video
Balun/Combiners.
Power with eight (8) HubWayAv Video
Balun/Combiners.
HubWayLD83CDS
Active UTP Transceiver Hub with Integral Camera
Power with eight (8) HubWayDv Video
Balun/Combiners.
Power with eight (8) HubWayDv Video
Balun/Combiners.
Models
Agency Approvals
UL Listed for Commercial CCTV Equipment
(UL 2044).
(UL 2044).
CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.
Audio, Video and Similar Equipment.