Altronix MOM5 プリント

• This multi output power distribution module converts one (1) non-power 

limited DC voltage input to five (5) power limited outputs. Each output 
will route power to a variety of access control hardware and devices which 
includes Mag Locks, Electric Strikes, Magnetic Door Holders, etc.
These outputs will operate in both fail-safe and fail-secure modes. 
Controlled trigger input is achieved through normally open (N.O.) or 
normally closed (N.C.) supervised input or the polarity reversal from an 
FACP (Fire Alarm Control Panel). A form “C” dry output relay will enable 
HVAC Shutdown, Elevator Recall or trigger auxiliary devices.  

• 12VDC or 24VDC output.
• 2.5 amp supply current.
• Five (5) individual Class 2 Rated PTC protected 

power limited outputs.

• Current limit is 12VDC or 24VDC @ 2 amp  

per output.

• NFPA72 compliant.
• Fire Alarm Panel or Access Control System trigger 

inputs, (N.O. or N.C. supervised trigger input and 
polarity reversal trigger input).

• Red LED’s indicate condition of each power output.
• Power & input trigger LED’s.  
• Power fail supervision relay 

(Form “C” contact rated 1 amp @ 28VDC/115VAC).

• Output relay indicates that unit is triggered.

(Form “C” contact rated 1 amp @ 28VDC/115VAC).

• Interfaces with most DC Power Supplies.

• Power distribution module.

• Power distribution module 

in enclosure.

Rev. DSMOM5-  L05F

MOM5: 5.25”L x 3.5”W x 1”H

MOM5

MOM5C

0.14"

2.4"

4.9"

5.3"

3.5"

Ø0.156"

0.19"