Altronix HUBSAT4WP プリント
Altronix HubSat4WP Outdoor Passive UTP Transceiver Hub w/Integral Camera
Power transmits UTP video, RS422/RS485 data and power over a single CAT-5
or higher structured cable. Unit provides 4 camera channels in a wall mount
enclosure. Video transmission range is up to 750 ft. max. per channel. Units are
compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit
features 24VAC or 28VAC PTC protected outputs and surge suppression.
Optionally, the HubSat4WP can be used as an accessory module to transmit
video from up to 4 cameras over a single CAT-5 or higher structured cable back
to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP
Transceiver Hubs. In addition, the HubSat4WP powers these cameras locally to
eliminate the possibility of voltage drop associated with long cable runs.
Power transmits UTP video, RS422/RS485 data and power over a single CAT-5
or higher structured cable. Unit provides 4 camera channels in a wall mount
enclosure. Video transmission range is up to 750 ft. max. per channel. Units are
compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit
features 24VAC or 28VAC PTC protected outputs and surge suppression.
Optionally, the HubSat4WP can be used as an accessory module to transmit
video from up to 4 cameras over a single CAT-5 or higher structured cable back
to the HubWay, HubWayLD or HubWayLDH Passive and Active UTP
Transceiver Hubs. In addition, the HubSat4WP powers these cameras locally to
eliminate the possibility of voltage drop associated with long cable runs.
HubSat4WP - Passive UTP Transceiver Hub
with Integral Camera Power
with Integral Camera Power
Rev. DSHubSat4WP - I10I
Overview
Input:
• 115VAC 50/60Hz, 1.25 amp.
• Primary fuse is rated at 3.5 amp/250V.
• Primary fuse is rated at 3.5 amp/250V.
Video:
• Four (4) channels of video over twisted pair
up to 750 ft.
• Four (4) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 4 amp (100VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• Four (4) individual power LED indicators.
Features:
• Wall mount enclosure.
Accessories:
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Enclosure:
• NEMA4 / IP65 Rated.
• Enclosure dimensions:
• Enclosure dimensions:
12”H x 8”W x 6”D
Shipping Weight (approximate):
- HubSat4WP: 13.75 lbs.
- HubSat42WP: 14.5 lbs.
- HubSat43WP: 15.0 lbs.
- HubSat42WP: 14.5 lbs.
- HubSat43WP: 15.0 lbs.
HubSat4WP
Outdoor Passive UTP Transceiver Hub with Integral
Camera Power. Video Balun/Combiners not included.
HubSat42WP
Camera Power. Video Balun/Combiners not included.
HubSat42WP
Outdoor Passive UTP Transceiver Hub with Integral
Camera Power includes four (4) HubWayAv Video
Balun/Combiners.
Camera Power includes four (4) HubWayAv Video
Balun/Combiners.
HubSat43WP
Outdoor Passive UTP Transceiver Hub with Integral
Camera Power includes four (4) HubWayDv Video
Balun/Combiners.
Camera Power includes four (4) HubWayDv Video
Balun/Combiners.
Specifications
Models
Agency Approvals
CE Approved.