Altronix HUBWAYLDH16 プリント

Altronix HubWayLDH16 Active UTP Transceiver
Hub transmits UTP video and RS422/RS485
data over a single CAT-5 or higher structured
cable. Unit provides 16 camera channels in a
space saving 1U EIA 19” rack mount chassis
which may be rack, wall or shelf mounted. Video transmission
range is up to 3000 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras. An optional
HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to 
transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWayLDH16. In
addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop 
associated with long cable runs.

• 115VAC 50/60Hz, 3 amp

or 230VAC 50/60Hz, 1 amp.

• Primary fuse (internal) is rated at 5 amp/250V.

• Sixteen (16) channels of video over twisted pair

up to a distance of 3000 ft. per channel.

• Sixteen (16) 75 ohm video outputs.

• RS422/RS485 data inputs.

• AC input power indicator.
• Video signal and power LED indicators.

• Picture and Gain control.
• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.

• Optional HubSat4D allows transmission of up to 

four (4) video signals over a single CAT-5 or higher
structured cable.

- HubWayLDH16: 11.05 lbs.

Active UTP Transceiver Hub

Rev. DSHubWayLDH16 - K25H

UL Listed for Commercial CCTV Equipment
(UL 2044).

CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.