Altronix HUBSAT43D プリント
Altronix new HubSat4D Passive UTP Transceiver Hub w/Integral
Camera Power transmits UTP video, RS422/RS485 data and power
over a single CAT-5 or higher structured cable. Unit provides 4
camera channels in a wall mount enclosure. Video transmission
range is up to 750 ft. max. per channel. Units are compatible with
AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners.
In addition, the unit features 24VAC or 28VAC PTC protected
outputs and surge suppression. Optionally, the HubSat4D can be
used as an accessory module to transmit video from up to 4
cameras over a single CAT-5 or higher structured cable back to the
HubWay, HubWayLD or HubWayLDH Passive and Active UTP
Transceiver Hubs.
In addition, the HubSat4D powers these cameras
locally to eliminate the possibility of voltage drop
associated with long cable runs.
Camera Power transmits UTP video, RS422/RS485 data and power
over a single CAT-5 or higher structured cable. Unit provides 4
camera channels in a wall mount enclosure. Video transmission
range is up to 750 ft. max. per channel. Units are compatible with
AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners.
In addition, the unit features 24VAC or 28VAC PTC protected
outputs and surge suppression. Optionally, the HubSat4D can be
used as an accessory module to transmit video from up to 4
cameras over a single CAT-5 or higher structured cable back to the
HubWay, HubWayLD or HubWayLDH Passive and Active UTP
Transceiver Hubs.
In addition, the HubSat4D powers these cameras
locally to eliminate the possibility of voltage drop
associated with long cable runs.
HubSat
®
4D Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubSat4D - E18I
Overview
Input:
• 115VAC 50/60Hz, 1.25 amp.
• Primary fuse is rated at 3.5 amp/250V.
• Primary fuse is rated at 3.5 amp/250V.
Video:
• Four (4) channels of video over twisted pair
up to 750 ft.
• Four (4) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 4 amp (100VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• Four (4) individual power LED indicators.
Features:
• Wall mount enclosure.
Accessories:
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Shipping Weight (approximate):
- HubSat4D: 8.0 lbs.
- HubSat42D: 8.5 lbs.
- HubSat43D: 8.7 lbs.
- HubSat42D: 8.5 lbs.
- HubSat43D: 8.7 lbs.
HubSat4D
Passive UTP Transceiver Hub with Integral Camera
Power. Video Balun/Combiners not included.
HubSat42D
Power. Video Balun/Combiners not included.
HubSat42D
Passive UTP Transceiver Hub with Integral Camera
Power includes four (4) HubWayAv Video
Balun/Combiners.
Power includes four (4) HubWayAv Video
Balun/Combiners.
HubSat43D
Passive UTP Transceiver Hub with Integral Camera
Power includes four (4) HubWayDv Video
Balun/Combiners.
Power includes four (4) HubWayDv Video
Balun/Combiners.
Specifications
Models
Agency Approvals
UL Listed for Commercial CCTV Equipment
(UL 2044).
(UL 2044).
CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.
Audio, Video and Similar Equipment.