Altronix HUBWAY82DI プリント

Altronix HubWay8Di Passive UTP Transceiver
Hub w/Integral Isolated Camera Power 
transmits UTP video, RS422/RS485 data
and power over a single CAT-5 or higher 
structured cable. Unit provides 8 camera
channels in a space saving 1U EIA 19” rack mount chassis which may
be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible
with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video
Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with
surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral Isolated Camera Power can be
used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable
back to the HubWay8Di. In addition, the HubSat4D provides power to these cameras locally to eliminate the possi-
bility of voltage drop associated with long cable runs.

• 115VAC 50/60Hz, 2.5 amp

or 230VAC 50/60Hz, 1.5 amp.

• Eight (8) channels of video over twisted pair

up to a distance of 750 ft. per channel.

• Eight (8) 75 ohm video outputs.

• RS422/RS485 data inputs.

• Individually selectable 24VAC or 28VAC power 

outputs with OFF position.

• Electronically isolated camera power.
• Unit provides up to 1 amp max. per channel not to 

exceed a total of 8 amp maximum current.

• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp 

per channel.

• Surge suppression.

• AC input power indicator.
• Eight (8) individual power LED indicators.

• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.

• Optional HubSat4D allows transmission of up to 

four (4) video signals over a single CAT-5 or higher
structured cable.

• Video Balun/Combiners:

- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC 

cameras without isolation.

- HubWay8Di: 12.3 lbs.
- HubWay82Di: 13.0 lbs.
- HubWay83Di: 13.5 lbs.

Eight (8) Channel Passive UTP Transceiver
Hub with Integral Isolated Camera Power
HubWay82Di

Eight (8) Channel Passive UTP Transceiver with 
eight (8) HubWayAv Video Balun/Combiners

Eight (8) Channel Passive UTP Transceiver with 
eight (8) HubWayDv Video Balun/Combiners

Rev. DSHubWay8Di - E18I

UL Listed for Commercial CCTV Equipment
(UL 2044).

CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.