Omnitron iConverter XGT+ 8589N-0-D ユーザーズマニュアル

 

■ 10GBASE-T Ethernet Media Converter 

 

■

Copper to Fiber interfaces: 

RJ-45 to XFP or RJ-45 to SFP+

 

■

Copper to Copper interfaces:  

RJ-45 to CX4 

 

■ IEEE 802.3an Compliant

 

■ Supports CWDM, DWDM and tunable DWDM fiber 

transceivers

 

■ Supports MSA power level 4 XFP transceivers

 

■ Supports up to 100m over CAT-6A and CAT-7

 

■ Short Reach mode (up to 30m) reduces power and 

cooling requirements per IEEE 802.3az Energy Efficient 

Ethernet (EEE) 

 

■ Built-in loopback for installation verification and 

troubleshooting

 

■ Link fault detection modes facilitate quick fault detection, 

isolation and reporting

 

■ LED displays for immediate visual status of each port

 

■ Omnitron transceivers support XFP and SFP+ digital 

diagnostics reporting via LEDs or management module

 

■ Standalone and high-density chassis plug-in modules

 

■ Management of the plug-in module is available with the 

addition of a management module to the chassis 

 

■ Provides management of wavelength tunable XFP 

transceivers, compliant with MSA SFF-8477 and INF-

8077i

 

■ SNMP management via NetOutlook

®

 provides 

monitoring, configuration and fault notification

 

■ 3 Year Warranty and free 24/7 Technical Support 

The iConverter XGT+ is a 10 Gigabit Ethernet media converter 

with one 10GBASE-T RJ-45 port and one pluggable transceiver 

port that provides copper-to-fiber and copper-to-copper media 

conversion.  Copper-to-fiber conversion is achieved with XFP 

or SFP+ fiber transceivers.  Copper-to-copper conversion is 

achieved with a CX4 XFP transceiver. 
The iConverter XGT+ provides a variety of 10G data center 

connectivity solutions, including resolving interface disparities 

between equipment with 10GBASE-T RJ-45 ports and 

existing rack servers or switches with fiber optic or CX4 ports.  

Architecture changes such as migrating from Top of Rack to 

End of Row can present cabling challenges when extending 

network distances from racks of servers.  The XGT+ converts 

short-reach cabling to multimode fiber, single-mode fiber or 

CAT-6A cabling (up to 100 meters) to extend distances to 

servers, switches and patch panels.  For CAT-6A cabling links 

less than 30 meters, the XGT+ supports 10GBASE-T Short 

Reach mode.  In this mode, the device conserves energy by 

reducing power and cooling requirements.
The  iConverter XGT+ also supports CWDM and DWDM 

transceivers to convert 10GBASE-T interfaces to WDM 

wavelengths.  This enables connecting equipment with 

10GBASE-T interfaces to iConverter CWDM multiplexers that 

expand fiber capacity and transport multiple 10G data channels 

across existing fiber links.
The XGT+ supports high-power (power level 4) XFP 

transceivers and the latest generation of wavelength tunable 

DWDM XFP transceivers.  The wavelength of a tunable 

transceiver can be programmed and saved, eliminating the 

need for external programming equipment.
Built-in loopback functions, on-board status LEDs and link 

fault propagation modes facilitate easy setup and quick 

troubleshooting. 
The iConverter XGT+ is available as a compact, unmanaged 

standalone unit, or chassis plug-in module that can be 

managed with a management module installed in the chassis. 

The hot-swappable, plug-in modules can be mounted in a 

variety of chassis with AC and DC power supplies.
The standalone iConverter XGT+ has built-in mounting 

brackets.  It is DC powered and available with an external 

AC/DC power adapter, or a terminal connector for wiring 

directly to a DC power source.

SFP+/XFPs not included