JVC LT-23D50 ユーザーズマニュアル

- 34 -

this volume is set to the preceding value,

and the second one is increasing the vol-

ume level.

No-Signal Detection (TV mode)

If no valid signal detected, it takes 5 minutes

to switch to the Stand-By mode unless any

signal detected or any Remote Control com-

mand is accessed.
After a Remote Control command (if No-Sig-

nal Timer is active) the timer stops and if no

signal detected again the timer is initialized

to 5 minutes and starts 3 seconds later

again to count down.
It is not valid in EXT modes.

Volume Bar

It is displayed in the lower middle of the

screen. When a volume command is re-
ceived (pressing

+ or

- by Re-

mote Control or Control panel at the top of

the TV) and no menu is active, it stays on the

screen for 3 seconds, after the last volume

command or until another command is re-

ceived in between.

EXT Modes

By pressing the AV button you can switch

your TV to EXT modes (except being in Tele-

text). Pressing this button will consecutively

switch the TV in one of the optional EXT

modes:EXT-1, EXT-2, EXT-2 S, EXT-3, EXT-

4, EXT-4 S and PC.
In order to quit the EXT mode press any digit
buttons or

Zoom Modes

Zoom mode can be changed by pressing

Zoom

button. You can change the screen

size according to the picture aspect ratio.

Select the optimum one from the following

ZOOM modes.

AUTO:
When a WSS (Wide Screen Signalling) sig-

nal, which shows the aspect ratio of the pic-

ture, is included in the broadcast signal or

the signal from an external device, the TV

automatically changes the ZOOM mode to

16:9 ZOOM mode PANORAMIC or FULL

mode according to the WSS signal.
When the AUTO mode does not function cor-

rectly due to poor WSS signal quality or

when you want to change the ZOOM mode,

change to another ZOOM mode manually.

Using the different screen formats
Press the Red button to select the different

modes: Auto,Full, Regular, Panoramic,14:9

Zoom,16:9 Zoom,16:9 Zoom Subtitle

modes.

Note: You can only choose REGULAR and FULL

in PC mode.

FULL:
This uniformly stretches the left and right

sides of a normal picture (4:3 aspect ratio)

to fill the wide TV screen.

For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect

ratio), use the FULL mode to restore the pic-

ture to its original shape.

REGULAR:
Use to view a normal picture (4:3 aspect ra-

tio) as this is its original shape.

PANORAMIC:
This stretches the left and right sides of a

normal picture (4:3 aspect ratio) to fill the

screen, without making the picture appear

unnatural.

ENG-IDTV-JVC-1724W-17 INCH TFT LCD.230205.p65

24.02.2005, 08:20