HP DL385p Gen8 704913-S01 ユーザーズマニュアル

LWAd

5.5 B

LpAm

37 dBA

FCC Rating

Class A

Normative Standards

CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1

NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
NOTE: The Listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.

Embedded

6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)

2 internal 4X connectors

DDR2-800MHz with 40 or 72-bit wide bus

x4 PCIe 2.0 provides 2GB/s maximum bandwidth

(8) 6Gb/s SAS links provide 4.8GB/s maximum bandwidth

Zero Memory RAID has no cache memory
40-bit 256MB ECC protected cache (battery upgrade available)
72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC
Zero Memory, Up to 2 logical volumes (8 physical drives)

Logical Drives Supported Up to 64 logical drives with cache

Host Memory Addressing 64-bit, supporting greater than 4GB server memory space

RAID 6, 60 (Advanced Data Guarding)

RAID 5, 50 (Distributed Data Guarding)

NOTE: A minimum of 512 MB cache is required to enable RAID 5, 50, 6, 60
NOTE: HP Smart Array Advanced Pack (SAAP 2.0) is no longer required to
enable RAID 6 & 60 (Advanced Data Guarding). However, controller must be in
firmware version 4.68 (or later).

RAID 1+0 (Striping & Mirroring)

RAID 0 (Striping), RAID 1 (Mirroring)

Technical Specifications

DA - 14329   North America — Version 25 — December 13, 2013

Page  58