Toshiba Strata CT DKT2510-FS ユーザーズマニュアル

➤

1. While on a call, press 

Cnf/Trn

.

The Line or [DN] LED flashes green (conference rate). 
You hear internal dial tone.

2. Dial the [DN] where 

the call will be 
transferred.

The Exchange line rings the called station. If you hear 
a single tone, you can then announce the call over the 
called telephone’s speaker. (If you hear ringing tone, 
the call was made with Tone Signalling.) 

3. If the station is idle, 

announce the call and 
hang up

...or if the station is 
busy or does not 
answer, hang up

The Line LED flashes green (on-hold). If you 
transferred the call from a [DN], the [DN]’s LED turns 
off. The Exchange line or [DN] camps on to the called 
station and the called station receives a warning tone. 
The camped-on call rings when you hang up.

...or to reconnect to 
the transferred line 
before it is answered, 
press the flashing 

Line

 or [DN] + 

#42

.

The Line LED is a steady red 
when the called station 
answers the transferred call.

If the call is not answered 
after a specified Recall time 
set in system programming, 
camp-on is cancelled and the 
transferred call rings back 
(when your station or [DN] is 
idle or sends two tone bursts 
if your telephone is busy).

The LCD shows the 
Exchange line number and the 
station number [203] where it 
was originally transferred.

Get user manuals: 

See SafeManuals.com