TP-LINK TD-W8950ND ユーザーズマニュアル

 

Figure 4-75 

¾

  Network Authentication: Select an authentication type from the drop-down list. Options 

available are: Open, Shared, WPA-Enterprise, WPA-Personal, WPA2-Enterprise, 
WPA2-Personal, Mixed WPA2/WPA Enterprise, and Mixed WPA2/WPA-PSK Personal. 

)

For most users, it is recommended to use the default Wireless LAN Performance settings. Any 
changes made to these settings may adversely affect your wireless network. Under certain 
circumstances, changes may benefit performance. Carefully consider and evaluate any changes 
to these wireless settings. 

WEP is a basic encryption method offering two levels of encryption, 64-bit and 128-bit encryption. 
To configure the WEP encryption, there are two ways. 

•  Keep the Network Authentication of Open (insecurity) and select Enabled from the WEP 

Encryption drop-down list, as shown in Figure 4-76. Open (insecurity) with WEP encryption 
disable allows any wireless station to associate with the access point. 

•  Select  Shared (good) from the Network Authentication drop-down list, as shown in Figure 

4-77.  Shared (good) must enable WEP encryption. Network using Open or Shared 
authentication with WEP encryption only allows stations using the same network key 
encryption to associate with it. Follow the instructions below to configure the Shared Keys. 

69