TP-LINK TL-WR2543ND ユーザーズマニュアル

 

- 38 - 

option. 

¾

 

Band - This field determines which operating frequency will be used. Two options are 

available: 2.4GHz and 5GHz. It is recommended that your computers and devices running 

video and voice applications use the 5GHz band, while your guest access and computers 

that are only browsing the web use the 2.4GHz band.     

z

 

2.4GHz - You can use the 2.4GHz band to connect to many classic wireless devices 

like gaming consoles, laptops, DVRs, ect. 

¾

 

Mode - Select the desired mode.   

11b only - Select if all of your wireless clients are 802.11b. 

11g only - Select if all of your wireless clients are 802.11g. 

11n only- Select only if all of your wireless clients are 802.11n. 

11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 

11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. 

Select the desired wireless mode. When 802.11g mode is selected, only 802.11g wireless 

stations can connect to the Router. When 802.11n mode is selected, only 802.11n wireless 

stations can connect to the Router. It is strongly recommended that you set the Mode to 

802.11b&g&n, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to 

the Router. 

¾

 

Channel width - Select the channel width from the drop-down list

.

 

The default setting is 

automatic, which can adjust the channel width for your clients automatically. 

)

If  11b only,  11g only, or 11bg mixed is selected in the Mode  field, the Channel Width 
selecting field will turn grey and the value will become 20M, which is unable to be changed.   

¾

 

Channel - This field determines which operating frequency will be used. The default channel 

is set to Auto, so the AP will choose the best channel automatically. It is not necessary to 

change the wireless channel unless you notice interference problems with another nearby 

access point. 

¾

 

Max Tx Rate - You can limit the maximum tx rate of the Router through this field. 

¾

 

Enable Wireless Router Radio - The wireless radio of this Router can be enabled or 

disabled to allow wireless stations access.   

¾

 

Enable SSID Broadcast - When wireless clients survey the local area for wireless networks 
to associate with, they will detect the SSID broadcast by the Router. If you select the Enable 
SSID Broadcast checkbox, the Wireless Router will broadcast its name (SSID) on the air.

 

¾

 

 

Check this box to enable WDS. With this function, the Router can bridge two 

or more Wlans. If this checkbox is selected, you will have to set the following parameters as 
shown in Figure 4-17. Make sure the following settings are correct.