TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 155 - 

¾

 

Shared - Indicates the shared or non-shared status of the volume. When the volume is 

shared, you can click the Disable to stop sharing the volume; when volume is non-shared, 

you can click the Enable button to share the volume. 

Click the Start button to start the Network Sharing service.   

Click the Stop button to stop the Network Sharing service.   

Click the Eject Disk button to safely remove the USB storage device that is connected to USB 

port. This takes the drive offline. A message (as shown in Figure 6-23) will appear on your web 

browser when it is safe to detach the USB disk.   

 

Figure 6-23 Safe Unplug Message 

Click the Rescan button to start a new scan.   

1.  Plug an external USB hard disk drive or USB flash drive into this router.   

2. Click 

the 

Rescan button to find the USB drive that has been attached to the router.   

3. Click 

the 

Start button to start the Storage Sharing service. 

4. Click 

the 

Enable button under Shared to enable the disk to share. 

5. Click 

the 

Open the disk to visit the sharing disk. 

)

1.  The router can automatically locate new USB drive. But to display the information about your 

USB device, you need to click the Rescan button manually.   

2.  The new settings will not take effect until you restart the service.   

3.  To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the 

USB port can cause damage to the device and loss of data.   

4.  Mounted volumes of each USB port are subject to the 8-volume limit. So you cannot access 

more than 8 volumes on the USB storage device.   

5.  If you change the storage settings during the storage connection is established, then the 

changes will not take effect until the router or the client is rebooted.