TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル
TL-WR710N
WiFi Pocket Router/AP/TV Adapter/Repeater
- 4 -
¾
LED
Status
Indication
Solid Green The device is working properly.
Blinking
Condition 1: System is booting.
Condition 2: The Ethernet Cable or USB Device is
connecting to the product.
connecting to the product.
Table 1-1 The LED Description
¾
USB: It is used to connect USB Flash or Hard Disk for ÿle sharing and Mobile devices for
charging.
¾
Reset:It is used to reset the Router to its factory defaults. With the Router powered on, use
a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes
quick-flash from slow-flash. And then release the button and wait the Router to reboot to its
factory default settings.
¾
LAN/WAN: This LAN/WAN port works as LAN in AP/Repeater/Client/WISP Client Router
mode and as WAN in Wireless Router mode. As LAN, it connects the Router to the local PC;
as WAN, it enables you connect the DSL/cable Modem, or Ethernet.
¾
LAN: This LAN port works as LAN in Wireless Router/ AP/Repeater/Client/WISP Client
Router mode. It connects the Router to the local PC.