TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 175 - 

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is 
not promoted) or 16 ASCII characters.   

)

If you do not set the key, the wireless security function is still disabled even if you have selected 
Shared Key as Authentication Type.   

 

Figure 7-10    The DHCP menu 

There are three submenus under the DHCP menu (shown in Figure 7-10), DHCP Settings, 

DHCP Client List and Address Reservation. Click any of them, and you will be able to configure 

the corresponding function. 

Choose menu “DHCP  → DHCP Settings”, and then you can configure the DHCP Server on the 

page as shown in Figure 7-11. The Router is set up by default as a DHCP (Dynamic Host 

Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are 

connected to the Router in the LAN.   

 

Figure 7-11 DHCP Settings 

¾

 

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must 

have another DHCP server within your network or else you must configure the computer 

manually.