TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 196 - 

¾

 

WISP Client Router - In this mode, the device enables multiple users to share Internet 

connection from WISP. 

 

Figure 8-4    The Network menu 

There are three submenus under the Network menu (shown in Figure 8-4): WAN, MAC Clone 
and LAN. Click any of them, and you will be able to configure the corresponding function.   

Choose menu “Network  → WAN”, and then you can configure the IP parameters of the WAN on 

the screen below. 

1.  If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will 

automatically get IP parameters from your ISP. You can see the page as follow (Figure 8-5): 

 

Figure 8-5

    WAN – Dynamic IP

 

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP 

address,  Subnet Mask,  Default Gateway, etc. Click the Renew button to renew the IP 

parameters from your ISP. Click the Release button to release the IP parameters.