TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 205 - 

the Internet again. If you wish to activate Connect on Demand, check the radio button. 

If you want your Internet connection to remain active at all times, enter “0” in the Max 

Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before 

your Internet connection terminates. 

¾

 

Connect Automatically - Connect automatically after the Router is disconnected. To 

use this option, check the radio button. 

¾

 

Connect Manually - You can configure the Router to make it connect or disconnect 

manually. After a specified period of inactivity (Max Idle Time), the Router will 

disconnect from your Internet connection, and you will not be able to re-establish your 

connection automatically as soon as you attempt to access the Internet again. To use 

this option, click the radio button. If you want your Internet connection to remain active at 

all times, enter "0" in the Max Idle Time field. Otherwise, enter the number in minutes 

that you wish to have the Internet connecting last unless a new link is requested. 

Caution: Sometimes the connection cannot be disconnected although you specify a time to 

Max Idle Time because some applications are visiting the Internet continually in the 

background. 

Click the Save button to save your settings. 

Choose menu “Network  → MAC Clone”, and then you can configure the WAN MAC address 

on the screen below, as shown in Figure 8-12: 

 

Figure 8-12  MAC Address Clone

 

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely 

needed here. 

¾

 

WAN MAC Address - This field displays the current MAC address of the WAN port. If your 

ISP requires you to register the MAC address, please enter the correct MAC address into 

this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit).   

¾

 

Your PC's MAC Address - This field displays the MAC address of the PC that is managing 

the Router. If the MAC address is required, you can click the Clone MAC Address  To 

button and this MAC address will fill in the WAN MAC Address field.