TP-LINK WiFi Pocket Router/AP/TV Adapter/repeater ユーザーズマニュアル

 

- 17 - 

These fields are case sensitive. If you have difficulty with this process, please contact 

your ISP. 

¾

 

Dynamic IP/Static IP - Select Static IP if IP address, subnet mask, gateway and DNS 

server address have been provided by your ISP. Otherwise, please select Dynamic IP. 

¾

 

Server IP Address/Name - Enter server IP address or domain name provided by your 

ISP. 

3. Then, 

the 

Wireless page will appear as shown in 

Figure 3-12

. Set the wireless parameters. It 

is recommended that you rename an SSID, choose a Security Type and enter a Password. 

Then click Next. 

 

Figure 3-12    Quick Setup - Wireless 

¾

 

Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list.   

¾

 

Wireless Network Name - Enter a string of up to 32 characters. The same name of 

SSID (Service Set Identification) must be assigned to all wireless devices in your 

network. The default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last 

unique six numbers of each Router’s MAC address). But it is recommended strongly 

that you change your networks name (SSID) to a different value. This value is 

case-sensitive. For example, TEST is NOT the same as test. 

¾

 

Region - Select your region from the pull-down list. This field specifies the region where 

the wireless function of the Router can be used. It may be illegal to use the wireless 

function of the Router in a region other than one of those specified in this field. If your