TP-LINK TL-SG3424P ユーザーズマニュアル

 

96

 

System Commands can be used to configure the System information and System IP, reboot and 

reset the switch, upgrade the switch system and other operations. 

The system-descript command is used to configure the Device Name, Device 

Location and System Contact. To clear all the information, please use no 

command. 

 { sysname {sysname} | location {location} | contact-info 

{contact_info} } 

{sysname | location | contact_info} 

  —— System Name(Device Name). The length of the name ranges 

from 1 to 32 characters. By default, it is empty. 

  ——  Device Location. It consists of 32 characters at most. By default, 

it is empty. 

  ——  Contact Information. It consists of 32 characters at most. By 

default, it is empty. 

Global Configuration Mode 

Configure the System Contact as www.tp-link.com.cn: 

 www.tp-link.com.cn 

The system-time gmt command is used to configure the time zone and the IP 

Address for the NTP Server. To clear all the information, please use no 

command.