TP-LINK TL-SG3424P ユーザーズマニュアル

 

130

 

Interface Configuration Mode 

Enable the PoE priority as low for port 2.: 

low 

(interface configuration) 

The power inline consumption (interface configuration) command is used to 

configure the power limit the port can spupply. 

 {power limit} 

  ——  the max power the corresponding port can supply. The value 

ranges from 1 to 300. Power limit= this value * 0.1W. For instance, if you want to 

configure the max power as 5W, you should enter 50. 

Interface Configuration Mode 

Configrue the power limit as 5W for port 2.: 

50 

The power inline time-segment command is used to configure the time range 

for the PoE port to supply power. no power inline time-segment is used to 

cancel the selected time-range. 

 {name}