TP-LINK TL-SG3424P ユーザーズマニュアル

 

145

 

policy1 

The acl policy action-add command is used to add ACLs and create actions 

for the policy. To delete the corresponding actions, please use no acl policy 

 command. 

 {policy-name} {acl-id} [rate rate] [osd { none | discard }] 

[e-port egress-port] [dscp dscp] [pri local-pri] [mirr mirror] 

 {policy-name} {acl-id} 

  ——  The Policy Name, ranging from 1 to 16 characters. 

  ——  The ACL for configuration in the policy. 

  ——  The rate of Stream Condition, ranging from 1 to 1000000 in kbps. 

osd  ——  Out of Band disposal of Stream Condition. It is the disposal way of the 

data packets those are transmitted beyond the rate. There are two options, 

none and discard. By default, the option is none. 

  ——  The Destination Port of Redirect. The data packets that match 

the corresponding ACL will be forwarded to the specific port. The destination 

port ranges from 1 to 8. By default, it is All Ports. 

  —— DSCP of QoS Remark. Specify the DSCP region for the data 

packets that match the corresponding ACL. DSCP ranges from 0 to 63. By 

default, it is not limited. 

local-pri  ——

 Local Priority of QoS Remark. Specify the local priority for the 

data packets that match the corresponding ACL. Local Priority ranges from 0 to 

3. 

  ——  The Mirror Port of Stream Mirror. By default, it is 1. 

Global Configuration Mode 

Create a Policy named policy1. For the data packets that match ACL 120 in the 

policy, if the rate beyond 1000kbps, will be discarded by the switch: