TP-LINK TL-SG3424P ユーザーズマニュアル

 

152

 

port. The lower value has the higher priority. 

  —— ExtPath Cost, which is used to choose the path and 

calculate the path costs of ports in different MST regions. It is an important 

criterion on determining the root port. The lower value has the higher priority. By 

default, it is automatic. 

  —— IntPath Cost, which is used to choose the path and 

calculate the path costs of ports in an MST region. It is an important criterion on 

determining the root port. The lower value has the higher priority. By default, it is 

automatic. 

edge  ——  Enable/ Disable Edge Port. By default, it is disabled. The edge port 

can transit its state from blocking to forwarding rapidly without waiting for 

forward delay. 

ptop  ——  The P2P link status, with auto, open and close options. By default, 

the option is auto. If the two ports in the P2P link are root port or designated port, 

they can transit their states to forwarding rapidly to reduce the unnecessary 

forward delay. 

Interface Configuration Mode（interface ethernet / interface range ethernet） 

Enable the STP function of port 1, and configure the Port Priority as 64, ExtPath 

Cost as 100, IntPath Cost as 100, and then enable Edge Port: 

 interface ethernet 1 

 enable pri 64 

 100 inpath 100 edge enable 

The spanning-tree region command is used to configure the region of MSTP. A 

switched network can be divided into many MST regions (Multiple Spanning 

Tree Regions). An MST region comprises multiple switches which have the 

same region configuration (including region name and region revision 

configuration) and the same VLAN-to-spanning-tree mapping configuration. 

 {name} {revision}