TP-LINK TL-SG3424P ユーザーズマニュアル

 

164

 

receive IGMP report message from the member port, it will consider this port is 

not a member port any more. Member Port Time ranges from 60 to 600 in 

seconds. By default, it is 260. 

  ——  Leave Time, which is the interval between the switch reveiving 

a leave message from a host and the switch removing the host from the 

multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1. 

  —— Static Router Port, which is mainly used in the network with 

stable topology. 

Global Configuration Mode 

Modify Router Port Time as 300 seconds, Member Port Time as 200 seconds, 

and Leave time as 15 seconds for VLAN 1: 

1 rtime 300 mtime 200 ltime 15 

The  igmp-snooping multi-vlan-config command is used to create Multicast 

VLAN. To delete the corresponding Multicast VLAN, please use no 

 command. 

{ disable | enable } {vid} [rtime router-time] 

[mtime member-time] [ltime leave-time] [rport router-port] 

disable | enable 

——

Enable/ Disable Multicast VLAN. 

 —— The ID of the VLAN desired to modify configuration, ranging from 2 to 

4094. 

 —— Router Port Time. Within this time, if the switch does not 

receive IGMP query message from the router port, it will consider this port is not 

a router port any more. Router Port Time ranges from 60 to 600 in seconds. By 

default, it is 300. 

 —— Member Port Time. Within this time, if the switch does not 

receive IGMP report message from the member port, it will consider this port is 

not a member port any more. Member Port Time ranges from 60 to 600 in