Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. TP-LINK
  4. TL-SG3424P
  5. ユーザーズマニュアル

TP-LINK TL-SG3424P ユーザーズマニュアル

ダウンロード
ページ / 220
 
38
 
Chapter 9 
LACP Commands 
LACP (Link Aggregation Control Protocol) is defined in IEEE802.3ad and enables the dynamic link 
aggregation and disaggregation by exchanging LACP packets with its partner. The switch can 
dynamically group similarly configured ports into a single logical link, which will highly extend the 
bandwidth and flexibly balance the load. 
lacp system-priority 
Description 
The lacp system-priority command is used to set global lacp system priority..   
Syntax 
Lacp system-priority value 
Command Mode 
Global Configuration Mode 
Parameter 
value —— system-priority, ranging from 0 to 65535. By default, the value is 
32768. 
Example 
Set global lacp system priority 1024: 
TP-LINK(config)# lacp system-priority 1024 
lacp admin-key 
Description 
The lacp admin-key command is used to configure the admin key. To restore to 
the default value, please use no lacp admin-key command.  
Syntax 
lacp admin-key value
 
no lacp admin-key 
Parameter 
value —— admin key, ranging from 0 to 65535. By default, the value is 1.