TP-LINK TL-SG3424P ユーザーズマニュアル

 

68

 

The dot1x quiet-period command is used to enable the quiet-period function. 

To disable the function, please use no dot1x quiet-period command. 

Global Configuration Mode 

Enable the quiet-period function: 

The  dot1x timer command is used to configure the Quiet Period and the 

SupplicantTimeout. To restore to the default, please use no  dot1x timer 

command. 

dot1x timer quiet-period period

 supp-timeout timeout 

 ——The value for Quiet Period, ranging from 1 to 999 in seconds. By 

default, it is 10. Once the supplicant failed to the 802.1X Authentication, then the 

switch will not respond to the authentication request from the same supplicant 

during the Quiet Period. 

 ——The maximum time for the switch to wait for the response from 

supplicant before resending a request to the supplicant., ranging from 1 to 9 in 

second. By default, it is 3. 

Global Configuration Mode