Triarch 31913 ユーザーズマニュアル

ASSEMBLY AND MOUNTING INSTRUCTION

ase read the Assembly lnstr

For 31913

Ple

uction sheet carefully before proceeding.Carefully unpack and

identify all parts prior to building the unit. Each part is identified on the drawing for reference.

ecure the mounting strap to the ceiling junction box

t the ground wire to the

nction box ground port;

TEP 6: lnstall center pipe and arms to the fixture

ber

ovided) ;

e glass

ap and finial

ll the correct bulbs(not provided).

DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must return the item
for any reason. Please repack the unit using the original carton and inserts.

STEP 1: Unpack all the parts and classify them according to the illustration shown at

the side.

Place the parts on a scratch free surface;

STEP 2: Make sure the power is turned off at the the

junction box where the fixture is to be installed.

using junction box screws;

STEP 3: Use the wire nuts to connect the positive

and negative wires. Connec

STEP 4: Secure the canopy to the ceiling with the

knurled ring;

STEP 5: lnstall the loop to the colum;

with nut and ball nut as shown;

STEP 7:Install the tempered glass by using the rub

washer and the cap nut screw in position;

TEP 8: Install the correct bulb(not pr

STEP 9: Install threaded nipple to the fixtur

Shade ,glass washer and nut . secure with botto

STEP 10: Install candle cover and fabric shade

as shown ;

TEP 11: Insta