Tunturi E6R ユーザーズマニュアル
10
OWNER'S MANUAL
•
E6R
(default value 70 kg in the
DISTANCE
window). The
display reads
KG
. Press
ENTER.
5.
Begin your workout.
N OTE !
If you wish, you can adjust the effort level
with the arrow keys during the training. If you
want to save these changes in the memory, press
the
want to save these changes in the memory, press
the
MEMORY
key after your workout and choose the
desired memory location. Press
ENTER
to confi rm
saving.
PAUSE
The values in a workout that has been interrupted
are saved in the memory of the user interface for
5 minutes, after which they are reset. You can
restart the interrupted exercise by pedaling within
5 minutes.
are saved in the memory of the user interface for
5 minutes, after which they are reset. You can
restart the interrupted exercise by pedaling within
5 minutes.
ERROR CODES
The user interface will display information about
operational faults.
operational faults.
Err 2 Data communication problem
Remove the power cord from the power outlet,
wait for 1 minute and then restart. If the error
message does not disappear, please contact your
Tunturi dealer.
wait for 1 minute and then restart. If the error
message does not disappear, please contact your
Tunturi dealer.
T R A N S P O R T A N D S T O R A G E
Please follow these instructions when carrying
and moving the cycle about, because lifting it
incorrectly may strain your back or risk other
accidents:
and moving the cycle about, because lifting it
incorrectly may strain your back or risk other
accidents:
N OTE !
Always switch the power off and unplug
the power cord before you start moving the
equipment around!
equipment around!
Move the recumbent cycle according to the
following instruction: stand behind the cycle and
take it by the seat frame with one hand and by the
handlebar with the other hand. Lift the E6R so
that it rests on the transport wheels and move it by
wheeling. Lower the cycle on the fl oor while
holding on to it and remaining all the time behind
the equipment.
following instruction: stand behind the cycle and
take it by the seat frame with one hand and by the
handlebar with the other hand. Lift the E6R so
that it rests on the transport wheels and move it by
wheeling. Lower the cycle on the fl oor while
holding on to it and remaining all the time behind
the equipment.
To prevent the equipment malfunctioning, store in
a dry place with as little temperature variation as
possible and protected from dust.
a dry place with as little temperature variation as
possible and protected from dust.
M A I N T E N A N C E
The equipment requires very little maintenance.
Check, however, from time-to-time that all screws
and nuts are tight.
Check, however, from time-to-time that all screws
and nuts are tight.
•
After exercising, clean the equipment with a
soft, absorbent cloth. Do not use solvents. Sweat
may cause corrosion: we recommend therefore that
you protect all metal surfaces outside the plastic
covers with tefl on or car wax.
may cause corrosion: we recommend therefore that
you protect all metal surfaces outside the plastic
covers with tefl on or car wax.
•
Never remove the equipment’s protective casing.
•
The electromagnetic brake forms a magnetic
fi eld that may damage the mechanism of a watch,
or the magnetic identifi cation strip on a credit
or cash card, should they come into immediate
contact with the magnets. Never attempt to detach
or remove the electromagnetic brake!
or the magnetic identifi cation strip on a credit
or cash card, should they come into immediate
contact with the magnets. Never attempt to detach
or remove the electromagnetic brake!
•
The electromagnetic brake is based on
electromagnetic resistance; resistance level is
electronically measured and shown as watt reading
on the display. Due to the measurement system,
your Tunturi ergometer need not be re-calibrated
when assembled, serviced and used according to
this Owner’s Manual.
electronically measured and shown as watt reading
on the display. Due to the measurement system,
your Tunturi ergometer need not be re-calibrated
when assembled, serviced and used according to
this Owner’s Manual.
•
If the equipment is not used for a period
of time, the transmission belt may become
temporarily distorted. This can lead to a sensation
of slightly uneven pedaling. However, after a few
minutes of use the effect disappears as the belt
returns to its original form.
temporarily distorted. This can lead to a sensation
of slightly uneven pedaling. However, after a few
minutes of use the effect disappears as the belt
returns to its original form.
N OTE !
If the equipment does not function
properly during use, contact your Tunturi dealer
immediately. Always give the model and serial
number of your equipment. Please state also the
nature of the problem, conditions of use and
purchase date. Despite continuous quality control,
defects and malfunctions caused by individual
components may occur in the equipment. In most
cases it’s unnecessary to take the whole equipment
in for repair, as it’s usually suffi cient to replace the
defective part.
immediately. Always give the model and serial
number of your equipment. Please state also the
nature of the problem, conditions of use and
purchase date. Despite continuous quality control,
defects and malfunctions caused by individual
components may occur in the equipment. In most
cases it’s unnecessary to take the whole equipment
in for repair, as it’s usually suffi cient to replace the
defective part.
T E C H N I C A L S P E C I F I C A T I O N S
Length..............................165 cm / 65 in
Height .............................100 cm / 40 in
Width .............................67 cm / 27 in
Weight ............................63 kg / 140 lbs
Height .............................100 cm / 40 in
Width .............................67 cm / 27 in
Weight ............................63 kg / 140 lbs
All Tunturi models meet the requirements of
the EU’s EMC Directives on electromagnetic
compatibility (89/336/EEC) and electrical
equipment designed for use within certain voltage
limits (73/23/EEC). This product therefore carries
the CE label.
the EU’s EMC Directives on electromagnetic
compatibility (89/336/EEC) and electrical
equipment designed for use within certain voltage
limits (73/23/EEC). This product therefore carries
the CE label.
The North American versions (115 V) comply
with FCC requirements on electromagnetic
compatibility and are accordingly marked with
the FCC label. The North American versions also
comply with the following safety standards: UL
1647 and CSA C 22.2 No. 68-92.
with FCC requirements on electromagnetic
compatibility and are accordingly marked with
the FCC label. The North American versions also
comply with the following safety standards: UL
1647 and CSA C 22.2 No. 68-92.
E6R_ohjekirja_vr2 10
2.10.2003, 13:02:49