Tunturi F20 ユーザーズマニュアル

adjustments other than those described 

in this guide. Everything else must 

be left to someone familiar with the 

maintenance of electromechanical 

equipments and authorised under the 

laws of the country in question to carry 

out maintenance and repair work. 

Your choice shows that you really want to invest in 
your well being and condition; it also shows you 
really value high quality and style. With Tunturi 
Fitness Equipment, you’ve chosen a high quality, 
safe and motivating product as your training 
partner. Whatever your goal in training, we are 
certain this is the training equipment to get you 
there. You’ll find information about using your 
exercise equipment and what makes for efficient 
training at Tunturi’s website at www.tunturi.com. 

Start by unpacking the equipment and check that 
you have the following parts:

 Frame

 Rear support 

Plastic covers for front support (2 pcs)

 Front support

 Pedals (2 pcs)

 Seat support

 Seat

 Handlebar support

 Handlebar

Console

Console back cover

Assembly kit (contents marked with in the 

spare part list): keep the assembly tools, as you may 
need them e.g. for adjusting the equipment.

If necessary, please contact your dealer with the 
model, equipment serial no. and spare part no. 
of the missing part. You’ll find a spare part list at 
the back of this guide. The packaging includes a 
silicate bag for absorbing moisture during storage 
and transportation. Please dispose of the bag once 
you have unpacked the equipment. The directions 
left, right, front and back are defined as seen from 
the exercising position.

Push the grey plastic covers in place at both 

ends of the rear support so that the support 
retainers are aligned with the oval holes of the 
covers. Fasten under the support with adjustment 
screws.

Place the rear support underneath the rear part 

of the frame.

Fasten the rear support with hex screws and 

washers.

Place front support underneath the front part of 

the frame and fasten with hex screws and washers.

The pedals are distinguished by the markings 

R (= right) and L (= left) on their shafts. Fasten 
the right pedal to the right pedal crank turning 
clockwise and the left pedal to the left pedal crank 
turning counterclockwise.

Fasten the pedal bands first into the retainer 

at the device. Thread the band through the 
pedal loop and push the band opening into the 
projection in the pedal.

 Fasten the pedal bands to the pedal outside. 

Push the band through the locking buckle and the 
band locks automatically.

The length of the band can be adjusted with the 

locking buckle.