Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Tunturi
  4. Competence T10
  5. ユーザーズマニュアル

Tunturi Competence T10 ユーザーズマニュアル

ダウンロード
ページ / 84
G B
7
O W N E R ' S   M A N U A L   •   T 1 0
PROGRAM 6 – PROGRAM 7:
 elevation program will 
change automatically during the exercise).
a.
  Press the SPEED + –button to set up your desired 
program.
b.
  The time window will glitter. Use the ELEVATION 
+  – or SPEED+  –buttons to set up the desired 
exercise time.
c.
  Press the Enter to confirm your setting value.
d.
  Distant window will glitter. Use the ELEVATION 
+  – or SPEED+  – buttons to set up the desired 
distance to do the exercise.
e.
  Press the Enter to confirm your setting value.
f.
  Kcal window will glitter. Use the ELEVATION +  
– or SPEED+  – buttons to set up the desired calories 
to be consumed.
g.
  Press the Enter to confirm your setting value.
h.
  Press Start to begin exercise.
NOTE:
 
1.
  If you would not like to select any special target to 
reach, just press Start to do the exercise.
2.
  If you would like to skip the target setting, press 
the enter key to next setting value and this function 
will count up.
3.
  If you set up more than one target, once reach 
the first target, Press Start again and this value will 
continue to count down until reach your next target.
USER1 – 2
a.
  Press SPEED + - or ELEVATION + - button to 
enter your desired User setting program.
b.
  The time window will glitter. Use the ELEVATION 
+  – or SPEED+  – buttons to set up the desired 
exercise time.
c.
  Press the Enter to confirm your setting value.
d.
  Distant window will glitter. Use the ELEVATION 
+  – or SPEED+  – buttons to set up the desired 
distance to do the exercise.
e.
  Press the Enter to confirm your setting value.
f.
  Kcal window will glitter. Use the ELEVATION +  
– or SPEED+  – buttons to set up the desired calories 
to be consumed.
g.
  Press the Enter to confirm your setting value.
h.
  The SPEED and ELEVATION windows will glitter. 
Press SPEED+ or –to set up desire speed and/or Press 
ELEVATION + or – to set up desired level of incline.
i.
  Press Enter to confirm the first column. 
j.
  Follow h points to finish the user setting profile. 
Total profile setting is 20 times. (20 columns)
k.
  Press Start to begin exercise.
NOTE: 
1.
  If you would not like to select any special target to 
reach, just press Start to do the exercise.
2.
  If you would like to skip the target setting, press 
the enter key to next setting value and this function 
will count up.
3.
  If you set up more than one target, once reach 
the first target, Press Start again and this value will 
continue to count down until reach your next target.
ENGINEERING MODE
1.
 during the power ON position, first hold the 
SELECT button then press the ENTER button 
together to enter the Engineering Mode
2.
 Speed window shows software version, Time 
window shows year, Distance window shows date.
3.
 Press ENTER button window shows LDU version. 
It is software version.
4.
 Press ENTER button window shows ISP version. It 
is software version.
5.
 Press ENTER button enter KM/MILE switch mode, 
1 means KM, 0 means MILE
Press SPEED + - or ELEVATION + - to select KM or 
MILE.
6.
 Press ENTER button window shows total distance.
7.
 Press ENTER button window shows total hour.
8.
 Press ENTER button goes back to ON position.
MAINTENANCE
The equipment is safe to use only when periodically 
maintained and inspected for faults and wear.
CAUTION!
 Do not attempt any servicing or adjustment 
other than those described in this manual. Any other 
servicing must be performed by an authorized service 
representative. Check the tightness of all fixing 
screws once a year. Do not overtighten.
LUBRICATING THE RUNNING DECK
Lubrication is the most important service activity 
for the treadmill. This is absolutely essential, if the 
friction of the running deck increases noticeably or 
the motor begins to heat up; increased friction is 
indicated by jerky movement of the belt. Insufficient 
lubrication will cause the belt, running deck and 
motor to wear out and break. The need for re-
lubrication depends to a great extent on the running 
styles and weight of the user: heavy user weight and 
slow speed put particular strain on the device and 
therefore demand greater lubrication. The running 
deck requires periodic lubrication. With average 
usage (30 minute workout session 3 times a week), 
lubricate every four to six months. You may adjust 
the timing of the lubrication based on the intensity of 
the treadmill use level. To check the lubrication level, 
simply lift the running belt, and put your hand as far 
into the center of the belt as you can reach. If your 
hand shows signs of lubricant (some wetness), then it 
does not need additional lubrication. If the board feels 
dry and there is very little evidence of lubricant on 
your hand, then additional lubrication should be added 
as instructed:
1.
 Stop running belt so belt seam is located on the top 
and in the center of the deck.
2.
 Insert nozzle into spray head of lubricant can.
3.
 Lift running belt.
4.
 Position nozzle between the belt and the board 
approximately 200 mm (8”) from the front of the 
treadmill.
5.
 Apply T-Lube from the front to the rear of the 
treadmill on each side of the treadmill. Try to reach 
the spray as far into the center of the running deck as 
possible.
6.
 The treadmill is instantly ready for use. 
Get user manuals: 
See SafeManuals.com