Turbosound TSB-110 ユーザーズマニュアル

Locate the four jumper locations on the circuit board, labelled J1, J2, J3, and J4. The unit is 
shipped with J2 and J4 connected with J1 and J3 not connected (dual 4 ohm mode). For single 8 
ohm operation unplug J2 and J4 and transfer the jumpers to J1 and J3. This connects the two 
voice coils in series and transfers the input to the left input only (pins 1+ and 1- on the Speakon 
NL4MP). Note: In single coil mode DO NOT use the right inputs and outputs as this will result in 
incorrect operation and may damage loudspeakers and amplifiers. 

 

 

Dimensions 

330mm x 585mm x 330mm (13” x 23” x 13”) 

Net weight 

16.5 kg (36.3 lbs) 

Frequency Response 

45Hz to 180Hz 

Power Handling 

300 watts r.m.s., 600 watts program 

Nominal Impedance 

2 x 4 ohms 

Sensitivity 

95dB, 1 watt @ 1metre 

Calc. Max SPL 

120dB continuous, 126dB peak 

Crossover 

Built-in high pass crossover network at 150Hz 

Construction 

15mm (5/8”) birch plywood 

Rigging 

4 x M10 internal rigging points 

Options 

TurboBlue or white semi-matt textured paint 

Spares & Accessories 

LS-1019.2 

10” LF driver (requires M5 x 35 fixing bolts) 

 RC-1019.2 

recone 

kit