AT&T TL90078 ユーザーズマニュアル
Appendix B
Troubleshooting
• Other electronic products can cause
interference with your cordless phone. Try
installing your phone as far away from the
following electronic devices as possible:
television sets, VCRs, or other cordless
telephones.
installing your phone as far away from the
following electronic devices as possible:
television sets, VCRs, or other cordless
telephones.
• Do not install this phone near a microwave
oven or on the same electrical outlet. You
may experience decreased performance
while the microwave oven is operating.
may experience decreased performance
while the microwave oven is operating.
• If your phone is plugged in with a modem or
surge protector, plug the phone (or modem/
surge protector) into a different location.
If this doesn't solve the problem, re-locate
your phone or modem farther apart from one
another, or use a different surge protector.
surge protector) into a different location.
If this doesn't solve the problem, re-locate
your phone or modem farther apart from one
another, or use a different surge protector.
• Relocate your telephone base to a higher
location. The phone will have better
reception when not installed in a low area.
reception when not installed in a low area.
My calls fade
out or cut in
and out while
I’m using
my cordless
handset.
out or cut in
and out while
I’m using
my cordless
handset.
20
• Other electronic products can cause
interference with your cordless phone. Try
installing your phone as far away as possible
from electronic devices like television sets,
VCRs, or other cordless telephones.
installing your phone as far away as possible
from electronic devices like television sets,
VCRs, or other cordless telephones.
• Re-install the battery, and place cordless
handset in the telephone base. Wait for
the cordless handset to re-establish its
connection with the telephone base. Allow
up to one minute for this to take place.
the cordless handset to re-establish its
connection with the telephone base. Allow
up to one minute for this to take place.
• Your line cord might be malfunctioning. Try
installing a new line cord.