HP (Hewlett-Packard) G6000 ユーザーズマニュアル
Computer feet
Description
Spare part number
Rubber Feet Kit (includes 4 base enclosure rubber feet)
431431-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
shown below.
Memory module
Description
Spare part number
1024-MB (PC2-4200, 533-MHz, 1-DIMM)
443489-001
1024-MB (PC2-5300, 667-MHz, 1-DIMM)
450610-001**
512-MB (PC2-5300, 667-MHz, 1-DIMM)
428879-001
256-MB (PC2-5300, 667-MHz, 1-DIMM)
445975-001
** For use with F550–F579, G6000 models
Before removing the memory module, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power cord.
4
.
Remove the battery (see
Battery on page 29
).
Remove the memory module:
1
.
Position the computer with the front toward you.
2
.
Loosen the three Phillips PM2.0×5.0 screws (1) that secure the memory module compartment cover
to the computer.
32 Chapter 4 Removal and replacement procedures