HP (Hewlett-Packard) G6000 ユーザーズマニュアル
4
.
Remove the battery (see
Battery on page 29
).
5
.
Remove the following components:
a
. Hard drive (see
Hard drive on page 30
)
b
. Memory module compartment cover (see
Memory module on page 32
)
c
. Optical drive (see
Optical drive on page 36
)
d
. Switch cover (see
Switch cover on page 38
)
e
. Keyboard (see
Keyboard on page 40
)
f
.
Display assembly (see
Display assembly on page 44
)
g
. Top cover (see
Top cover on page 49
)
Remove the audio board:
1
.
Remove the two Phillips PM2.5×5.0 screws (1) that secure the audio board to the computer.
2
.
Release the audio board (2) by sliding it away from you until the connectors on the front of the board
disengage from the openings in the base enclosure.
3
.
Remove the audio board (3).
4
.
Disconnect the audio board cable (4) from the audio board.
Reverse this procedure to install the audio board.
52 Chapter 4 Removal and replacement procedures