Frigidaire FPGC3087MS ユーザーズマニュアル

7

Burner Cap

Burner Head

Fig. 1

Correct Burner Cap 

Placement

Fig. 2

Incorrect Burner Cap 

Placement

Fig. 3

Burner Cap Lip

The burner cap lip (See Fig. 1) should fi t snug into the 

center of burner head and rest level. Refer to Figs. 2 & 

3 for correct and incorrect burner cap placement. Once 

in place, you may check the fi t by gently sliding the 

burner cap from side to side (page 6, fi g. 2) to be sure 

it is centered and fi rmly seated. When the burner cap lip 

makes contact inside the center of the burner head you 

will be able to feel it . Please note that the burner cap 

should NOT move off the center of the burner head when 

sliding from side to side.

Burner Caps

Fig. 4

Fig. 5

Recessed area

Burner Head

The Double Ring burner only operates properly with two 

burner caps in place. Be sure the burner cap lips are 

positioned facing down towards the burner head (Fig. 4) 

and into the recessed areas (Fig. 5) on each side of the 

burner head. Be sure both burner caps are seated fi rmly 

and rest level on the burner head before operating. 
Check the fi t for each cap using the same method for the 

round burner caps by gently sliding each cap from side 

to side. Please note that the burner cap lips should NOT 

move out of recessed areas of the burner head.