JVC VN-X35U ユーザーズマニュアル
57
B
FTP
Time Filter:
For specifying the periodic FTP transfer action with respect to each day of
the week and setting the corresponding time of the day.
the week and setting the corresponding time of the day.
Applicable day of week : Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday
Alarm action
Unmask Span
: For specifying the time period for invoking the
action
Mask Span
: For specifying the time period to stop the action
Unmask All
: Activated at all times
Mask All
: Stopped at all times
Applicable time period : For specifying the start and end time in hours and
minutes.
Pre-/Post-recording parameter:
[PrePostRecording Frame Rate]
: For specifying the JPEG frame rate for
FTP pre-/post-recording.
[PrePostRecording Before Trigger] : For setting the FTP pre-recording
trigger time (recording time before
alarm input) in seconds.
alarm input) in seconds.
[Setting range: 0 to 60 seconds]
[PrePostRecording After Trigger]
: For setting the FTP post-recording
trigger time (recording time after alarm
input) in seconds.
input) in seconds.
[Setting range: 0 to 60 seconds]
Memo:
● The maximum time intervals for [PrePostRecording Before Trigger] and
[PrePostRecording After Trigger] are determined by the JPEG size on the
Encoding page as well as the set values for [PrePostRecording Frame
Rate]. A message appears if the combination of the entered values are
not feasible.
Encoding page as well as the set values for [PrePostRecording Frame
Rate]. A message appears if the combination of the entered values are
not feasible.
C
Alarm Output
For setting the alarm output.
Duration
For setting the output time of [Manual Output].
[Setting range: 0, 100 msec to 5000 msec]
[Setting range: 0, 100 msec to 5000 msec]
Manual
Output
Output
For operating alarm output manually.
The current output status appears on the right. When [Duration] is set to “0”,
pressing the [Make] button switches the alarm to Make output, while
pressing the [Break] button switches the alarm to Break output.
When [Duration] is set to a value other than “0”, pressing the [Make] button
switches the alarm to Make output only during the duration of the output,
upon which it switches to Break output.
When the output duration is set to a value other than “0”, pressing the
[Break] button switches the alarm to Break output only during the duration of
the output, upon which it switches to Make output.
The current output status appears on the right. When [Duration] is set to “0”,
pressing the [Make] button switches the alarm to Make output, while
pressing the [Break] button switches the alarm to Break output.
When [Duration] is set to a value other than “0”, pressing the [Make] button
switches the alarm to Make output only during the duration of the output,
upon which it switches to Break output.
When the output duration is set to a value other than “0”, pressing the
[Break] button switches the alarm to Break output only during the duration of
the output, upon which it switches to Make output.