JVC HR-J6003UM ユーザーズマニュアル
23
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
Record One Program While
Watching Another
ENGAGE TV MODE
1
During recording...
● If using the RF connection (
Z
pg. 4), press TV/VIDEO.
The VCR's VIDEO indicator goes out and the TV
broadcast being recorded disappears.
broadcast being recorded disappears.
● If using the AV connection (
Z
pg. 4), change the
TV's input mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
want to watch.
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
● Make sure "SUPERIMPOSE" is set to "ON" (
Z
pg. 15).
Recording
6
5
/
8
q
–
™
+
£
C.RESET
OSD
TV/VIDEO